Thermal Engitech Private Limited
Thermal Engitech Private Limited
Odhav, Ahmedabad, Gujarat
Send SMS
Send E-mail

Industrial Boilers

Providing you the best range of industrial steam boiler, smoke cum water tube type combi boiler, solid fuel boiler, boiler fittings, coal fired boiler and wood fired boiler with effective & timely delivery.
Request CallBack
Industrial Steam Boiler
Get Best Quote
Approx.
Rs 8 Lakh
Per Piece

Industrial Steam Boiler

Product Details:
Capacity0-500 kg/hr, 500-1000 kg/hr, 1000-2000 kg/hr, 2000-3000 kg/hr, >3000 kg/hr
Working Pressure5-10 kg/cm2g, 10-15 kg/cm2g, 15-20 kg/cm2g, 20-25 kg/cm2g, >25 kg/cm2g
FuelOil Fired, Coal Fired, Gas Fired, Oil and Gas Fired, Biological, BIO GAS
BrandTEPL
With the help of diligent and adept professionals, we have been able to offer our precious clients a qualitative range of Industrial Steam Boiler. The pressure vessel of a boiler is usually made of steel (or alloy steel), or historically of wrought iron. Stainless steel, especially of the austenitic types, is not used in wetted parts of boilers due to corrosion and stress corrosion cracking. However, ferritic stainless steel is often used in super heater sections that will not be exposed to boiling water, and electrically-heated stainless steel shell boilers are allowed under the European "Pressure Equipment Directive" for production of steam for sterilizers and disinfectors.

Features:

  • Complete gas-tight construction
  • Greater absorption of radiant heat
  • Fast water circulation resulting in accelerated start up and better boiler response to load fluctuations
  • Designed to give full load efficiency upto 80%

Yes! I am interested
Request CallBack
Smoke cum Water Tube Type Combi Boiler
Get Best Quote
Approx.
Rs 9 Lakh
Per Piece

Smoke cum Water Tube Type Combi Boiler

Product Details:
Brand/MakeTEPL
Model/TypeTE
Material of ConstructionMILD STEEL
With the help of our professionals, we have been able to offer our clients a qualitative range of Smoke cum Water Tube Type Combi Boiler. Fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials (sand, limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification. The resultant fast and intimate mixing of gas and solids promotes rapid heat transfer and chemical reactions within the bed. FBC plants are capable of burning a variety of low-grade solid fuels, including most types of coal and woody biomass, at high efficiency and without the necessity for expensive fuel preparation.

Features:

  • Increases the gas turbine firing temperature by using natural gas in addition to the vitiated air from the PFB combustor
  • Mixture is burned in a topping combustor to provide higher inlet temperatures for greater combined cycle efficiency
  • In more advanced second-generation PFBC systems, a pressurized carbonizer is incorporated to process the feed coal into fuel gas and char

Yes! I am interested
Request CallBack
Solid Fuel Boiler
Get Best Quote
Approx.
Rs 7 Lakh
Per Unit

Solid Fuel Boiler

We are reckoned as the foremost manufacturer and supplier of Solid Fuel Boiler. In order to create optimum burning characteristics of the fire, air needs to be supplied both through the grate, and above the fire. Most boilers now depend on mechanical draft equipment rather than natural draught. This is because natural draught is subject to outside air conditions and temperature of flue gases leaving the furnace, as well as chimney height. All these factors make effective draught hard to attain and therefore make mechanical draught equipment much more economical.

Features:

  • The denser column of ambient air forces combustion air into and through the boiler
  • The second method is through use of a steam jet
  • The steam jet or ejector oriented in the direction of flue gas flow induces flue gases into the stack and allows for a greater flue gas velocity increasing the overall draught in the furnace

Additional Information:
  • Minimum Order Quantity: 1 Unit
Yes! I am interested
Request CallBack
Boiler Fittings
Get Best Quote
Approx.
Rs 1 Lakh
Per Unit

Boiler Fittings

Product Details:
Minimum Order Quantity1 Unit
Size1/2 inch, 3/4 inch
ApplicationStructure Pipe, Chemical Fertilizer Pipe
BrandTEPL
We are instrumental in providing our clients a comprehensive range of Boiler Fittings. These are used to relieve pressure and prevent possible explosion of a boiler. It is a dead weight on the end of an arm that was lifted by excess steam pressure. The vibrations of locomotive engines caused the fittings to bounce and "fizzle" wasting steam. These are therefore replaced by various spring-loaded devices. It is good practice to ensure that the discharge pipework is kept as short as possible with the minimum number of bends, so that the allowable back pressure indicated by the valve manufacturer is not exceeded.

Features:

  • The minimum inlet bore of fittings connected to a boiler shall be 20 mm
  • The maximum set pressure of the fittings shall be the design of the boiler
  • There must be an adequate margin between the normal operating pressure of the boiler

Yes! I am interested
Request CallBack
Coal Fired Boiler
Get Best Quote
Approx.
Rs 6.5 Lakh
Per Unit

Coal Fired Boiler

Product Details:
Minimum Order Quantity1 Unit
UsageIndustrial
Brand/MakeTEPL
Material of ConstructionSteel
With enriched industry experience and knowledge, we are providing an excellent range of Coal Fired Boiler. Balanced draught is obtained through use of both induced and forced draft. This is more common with larger boilers where the flue gases have to travel a long distance through many boiler passes. The induced draft fan works in conjunction with the forced draft fan allowing the furnace pressure to be maintained slightly below atmospheric.

Features:
  • Air is often passed through an air heater
  • Dampers are used to control the quantity of air admitted to the furnace
  • Forced draught furnaces usually have a positive pressure

Yes! I am interested
Request CallBack
Wood Fired Boiler
Get Best Quote
Approx.
Rs 6 Lakh
Per Unit

Wood Fired Boiler

We are a renowned manufacturer and supplier of the best quality Wood Fired Boiler. An outdoor wood boiler or outdoor wood stove is a unit about 4-6 feet wide and around 10 feet long. It is made up of three main parts, the firebox, which can be either round or square, the water jacket, and the exhaust heat reclaiming system. The fire box ranges from 2 to 5 feet long and can be as tall as 4 feet. It is fit lengthwise inside the outer shell and is surrounded by the water jacket. The water Jacket is a second shell around the fire box which is filled with water, which is circulated through insulated underground lines to the house, where the heat can be transferred from the water to the existing heating system.

Features:

  • After the wood is burned, the smoke is passed through the water jacket to reclaim much of the heat in the exhaust
  • An improperly used or built outdoor wood boiler can produce great amounts of wood smoke and waste material
  • This is a new breed of wood boilers that use naturally occurring secondary combustion to burn additional wood gases

Specifications:

  • Length: 10 feet
  • Wide: 4 - 6 feet
  • Material: Steel

Additional Information:
  • Minimum Order Quantity: 1 Unit
Yes! I am interested
Request CallBack
Husk Fired Boiler
Get Best Quote
Approx.
Rs 8 Lakh
Per Unit

Husk Fired Boiler

Being a trustworthy enterprise, we are offering a distinguished array of Husk Fired Boiler. However, it needs be treated separately, as to some extent a variety of generator types can be combined with a variety of engine units. A boiler incorporates a firebox or furnace in order to burn the fuel and generate heat. The generated heat is transferred to water to make steam, the process of boiling. This produces saturated steam at a rate which can vary according to the pressure above the boiling water. The higher the furnace temperature, the faster the steam production.

Specifications:

  • This notably reduces suspended water content making a given volume of steam produce more work and creates a greater temperature gradient
  • The saturated steam thus produced can then either be used immediately to produce power via a turbine and alternator
  • Any remaining heat in the combustion gases can then either be evacuated or made to pass through an economizer

Additional Information:
  • Minimum Order Quantity: 1 Unit
Yes! I am interested
Request CallBack
High Temperature Boiler
Get Best Quote
Approx.
Rs 10 Lakh
Per Unit

High Temperature Boiler

With immense industrial experience, we are deeply engrossed in offering a wide assortment of qualitative High Temperature Boiler. These achieve high efficiency (typically greater than 90% on the higher heating value) by using waste heat in flue gases to pre heat cold water entering the boiler. Water vapour produced during combustion is condensed into liquid form, which leaves the system via a drain. Boiler performance is based on the efficiency of heat transfer and highly dependent on boiler size/output and emitter size/output. System design and installation are critical.

Specifications:

  • Matching the radiation to the Btu/Hr output of the boiler and consideration of the emitter/radiator design temperatures determines the overall efficiency of the space and domestic water heating system.
  • One reason for an efficiency drop is because the design and/or implementation of the heating system gives return water (heat transfer fluid) temperatures at the boiler of over 55°C (131°F)
  • The lower the return temperature to the boiler the more likely it will be in condensing mode

Additional Information:
  • Minimum Order Quantity: 1 Unit
Yes! I am interested
Request CallBack
Combi Boiler
Get Best Quote
Approx.
Rs 8 Lakh
Per Unit

Combi Boiler

Product Details:
Minimum Order Quantity1 Unit
Brand/MakeTEPL
Model/TypeTE-Combi
Material of ConstructionSteel
Backed by sedulous team of professionals, we are engaged in offering a wide array of Combi Boiler. The heater is normally turned off, but is equipped with flow sensors which activate it when water travels through them. A negative feedback loop is used to bring water to the target temperature. The water circulates through a copper heat exchanger and is warmed by gas or electrical heating. Since there is no finite tank of hot water that can be depleted, the heater provides a continuous supply. To protect the units in acidic environments, durable coatings or other surface treatments are available. Acid-resistant coatings are capable of withstanding temperatures of 1000 °C.

Features:

  • Combi boilers eliminate the need for a cold water tank and hot water cylinder
  • Drinkable water at all taps because none of the cold water is stored in a tank
  • Some smaller capacity combi boilers can be fit into cupboards

Yes! I am interested
Request CallBack
Boiler Stack
Get Best Quote
Approx.
Rs 2 Lakh
Per Unit

Boiler Stack

Product Details:
Minimum Order Quantity1 Unit
Inlet Tempertaure3 bar
Outlet Tempertaure23 bar
Model/TypeTE-ST
Our organization holds immense expertise in manufacturing and supplying a wide range of Boiler Stack. During the heating season, the warmer indoor air rises up through the building and escapes at the top either through open windows, ventilation openings, or unintentional holes in ceilings, like ceiling fans and recessed lights. The rising warm air reduces the pressure in the base of the building, drawing cold air in through either open doors, windows, or other openings and leakage. During the cooling season, the stack effect is reversed, but is typically weaker due to lower temperature differences.

Features:

  • When air or flue gases flow due to the difference in density of the hot flue gases and cooler ambient gases
  • When air or flue gases are maintained above atmospheric pressure. Normally it is done with the help of a forced draft fan
  • Maximum efficiency

Yes! I am interested
Request CallBack
Condensing Boiler
Get Best Quote
Approx.
Rs 4 Lakh
Per Unit

Condensing Boiler

Product Details:
Minimum Order Quantity1 Unit
Inlet Temperature4 bar
Outlet Temperature20 bar
Material of ConstructionMild steel
Under the direction of our trained professionals, we manufacture and supply to our clients a quality assured gamut of Condensing Boiler. The boiler is designed so that the cooler water returning from the radiators is passed through a secondary heat exchanger to be warmed by the hot flue gases which are normally expelled in to the air. The warmer water is then sent back to the radiators. Water vapour produced during combustion is condensed into liquid form, which leaves the system via a drain. In many countries, the use of condensing boilers is compulsory or encouraged with financial incentives.

Features:

  • The lower the return temperature to the boiler the more likely it will be in condensing mode
  • The control of the domestic condensing boiler is crucial to ensuring that it operates in the most economic and fuel efficient way
  • The burners are usually controlled by an embedded system with built-in logic to control the output of the burner to match the load and give best performance

Yes! I am interested
Request CallBack
Semi Automatic Boiler
Get Best Quote
Approx.
Rs 6.5 Lakh
Per Unit

Semi Automatic Boiler

Product Details:
Minimum Order Quantity1 Unit
Brand/MakeTEPL, TEPL
Model/TypeTE-WBC/OG, TE-WBC/OG
Material of ConstructionStainless Steel, Stainless Steel
Our organization is actively engaged in manufacturing and supplying of premium quality Semi Automatic Boiler. The offered semi automatic boiler is delivered to our customers only after its proper examination on numerous parameters. This semi automatic boiler is manufactured with quality approved material with the help of the advance techniques. A supercritical steam generator operates at such a high pressure (over 3,200 psi or 22 MPa) that the physical turbulence that characterizes boiling ceases to occur; the fluid is neither liquid nor gas but a super-critical fluid.

Features:

  • There is no generation of steam bubbles within the water, because the pressure is above the critical pressure point at which steam bubbles can form.
  • As the fluid expands through the turbine stages
  • The fluid at that point may be a mix of steam and liquid droplets as it passes into the condenser

Yes! I am interested
Request CallBack
Hot Oil System
Get Best Quote
Approx.
Rs 4 Lakh
Per Unit

Hot Oil System

Product Details:
Minimum Order Quantity1 Unit
ModelTE-TFH
Inlet Temperature30 deg C
Outlet Temperature260 deg C
We are leading manufacturer of Hot Oil System.

3-pass fully wet back steam boiler
  • Thermal-Max Steam Boiler
  • Smoke tube type system boiler with three pass fully wet back design, suitable for cal / agro waste / oil / gas fuel

Yes! I am interested
Request CallBack
Boiler Chimney
Get Best Quote
Approx.
Rs 2 Lakh
Per Unit

Boiler Chimney

Product Details:
Minimum Order Quantity1 Unit
Brand/MakeTEPL
Model/TypeTE-ST
Material of ConstructionStainless Steel
We are leading manufacturer of Boiler Chimney.

Yes! I am interested
X
Looking for “Industrial Boilers”?